Front Loading Aqueous Parts Washers

Southern CO's Largest Selection




LC Series

Front Load Parts Washers

  • Stainless steel oil skimmer
  • Low water shutoff protection
  • Adjustable thermostat
  • Basket diameter: 25 to 48 inches
  • Working height: 30 to 60 inches
  • Load capacity: 500 to 2500 lbs

With 4 different models, there is no line of front-load, automatic parts washers with the cleaning versatility of Landa’s LC (large capacity). Besides a wide variety of electrical configurations, all models come with the LC’s unique roll-in door design reducing the amount of floor space used by traditionalswing out cabinet doors. With a load diameter of up to 48 inches and load height of up to 60 inches (72 inches with optional extension), the LC handles loads up to 2,500 lbs.




7530 Series

Front Load Parts Washers

  • Vertical Seal-less Pump
  • 3 HP
  • 50 GPM
  • 45 PSI
  • 500 lbs. Load Capacity
  • 40 Gal. Sump Capacity
  • 6 kW Heater
  • 65"H x 45"W x 48"D

The 7530 Series is the smallest front-load automatic parts washer in the Hotsy line, with a load capacity of 500 lbs. and a working height of 30". Safer than manual parts washers, the 7530 Series uses no solvents. 




7650 Series

Front Loading Parts Washers  

  • Vertical Seal-less Pump
  • 3 HP
  • 50 GPM
  • 45 PSI
  • 750 lbs. Load Capacity
  • 50 Gal. Sump Capacity
  • 6 kW Heater
  • 75"H x 50"W x 51"d
The 7650 Series is a mid-size front-load automatic parts washer, with a load capacity of 750 lbs. With a working height of 40", and a turntable diameter of 28", the 7650 Series is a powerful commercial parts washer using no solvents.





7660 Series

Front Loading Parts Washers  

  • Vertical Seal-less Pump
  • 5 HP
  • 110 GPM
  • 50 PSI
  • 750 lbs. Load Capacity
  • 50 Gal. Sump Capacity
  • 9 kW Heater
  • 83"H x 50"W x 51"D

The 7660 Series is a front-load automatic parts washer.  With a turntable diameter of 28",and a working height of 48", the 7660 has a load capacity of 750 lbs, and with a standard parts tree you can clean multiple parts at once.




7870 Series

Front Loading Parts Washers  

  • Vertical Seal-less pump
  • 7.5 HP
  • 50 PSI
  • 5000 lbs. Load Capacity
  • 156 Gal. Sump Capacity
  • 18 kW Heater
  • 106” H x 66” W x 75” D

With a load capacity of 5000 lbs, the 7870 is our largest industrial parts washer.  The 7870 series diameter is  an impressive 48", and with a working height of 60" it is capable of cleaning an entire engine block.